From yahoo Sent Mon, Jul 17th 2017, 07:40
Hello, I'm sorry about the problems with the module. I cannot remember that we ever had a similar problem. The LED should not blink unless an external CV (e.g. from an LFO) is applied. I suppose that the module has to be repaired and follow the repair notes on the FAQ page of our website: www.doepfer.com > English > FAQ > General > Repair procedure If you are familiar with electronics the DIY repair notes may help: www.doepfer.com > English > FAQ > A-100 > DIY repair tips Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Sonntag, 16. Juli 2017 19:09 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A-134-1 problem > > Since today, when I start-up my system there's one 134-1 with a strange behaviour. > When the module starts up the two leds are blinking, and they > will go blinking faster and faster until both keep lit. When I > turn the panning-pot, nothing happens, they both keep lit, as > connected to a LFO....nothing.... > Anyone any idea??? > Cheers and thanks, > Danny ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/