From Florian Anwander Sent Sat, Oct 28th 2017, 10:35
Hello On 27.10.17 20:25 , xxxxx.xxxxxx@xxx.xxx [Doepfer_a100] wrote: > Dieter - Please consider the option of making the variable CV in (on modules that have them) work so if the input attenuator is turned all the way up, that input tracks at 1v/Oct. This is a very convenient and useful alternative too. I am strictly against this request. You need a much higher modulation amount. Imagine an filtermodulation by the A-145, which would be limited to a +/- 2.5-Octave range: Assume, your cutoff is at 100Hz (which is around the second overtone for a low bass), then you would not be able to open the filter by the LFO more than to 320Hz!!!! If I need 1V/Oct, then there is already a dedicated 1V/Oct-Input. If I need two of them for one module I will have an precision adder in front of the module Florian ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/