From yahoo Sent Thu, Nov 15th 2018, 09:19
Hello, in the A-135-2 only the audio inputs can be normalled via jumpers. Because of the very compact design there was no space left on the pc board for the CV normalling jumpers. We discussed if we add the CV normalling features without jumpers (i.e. permanent normalling). But in the past we had problems with fixed normalling because some customers complained that the module is faulty as they were not aware of the normalling or did not understand this feature. But it's very easy to add the CV normalling by means of 3 short wires that connect the corresponding terminals of the sockets. In the technical document of the A-135-2 we will explain that. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Mittwoch, 14. November 2018 20:11 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A135-2 Quad VCA / Voltage Controller Mixer > > Hello, I would like to ask a question about the forthcoming A135-2! > Are the CV inputs going to be normalled just as the signal inputs? > I ask this because in A135-1 both CV and signal inputs are normalled. > > Posted by: xxxxxxxxxxxxxxxxxxxxx@xxxxxxx.xxx ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/