From yahoo Sent Thu, Jun 8th 2017, 07:43
Yes, the sine/cosine outputs of the A-110-6 may be used. But as they are derived by waveshaping from triangles the waveforms are not as perfect as sine/cosine from VCOs with sine/cosine core. For best results I'd recommend a VCO with sine/cosine core. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Donnerstag, 8. Juni 2017 09:33 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: AW: [Doepfer_a100] Question regarding the A-126-2 > > > Ok thank you Dieter. I'll keep the blank panel in place for now > then. Can I ask (this may be stupid!) as I have one of the new > A-110-6 in order; will this also be a suitable VCO to use as a > quadrature source? > > Neil > > Sent from my iPhone > > > On 8 Jun 2017, at 08:25, xxxxx@xxxxxxx.xx [Doepfer_a100] > <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> wrote: > > > > Neil, > > > > it's too early to specify the width as it will depend upon the features > > included in the planned new frequency shifter module (i.e. built-in > > quadrature VCO or connection for external VCO like > A-110-4/A-143-9, built-in > > squelch circuit with envelope follower and VCA ...). > > > > Best wishes > > Dieter Doepfer > > > >> -----Ursprüngliche Nachricht----- > >> Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > >> Gesendet: Mittwoch, 7. Juni 2017 22:57 > >> An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > >> Betreff: [Doepfer_a100] Question regarding the A-126-2 > >> > >> > >> Hi Dieter, > >> > >> I have got to the point with my A-100 system where I am now close > >> to running out of space. I am happy with its size and dont want > >> it to grow further; however I am committed to leaving a space for > >> the eventual release of the A-126-2. Could you let me know if you > >> will be keeping it at 8HP? > >> > >> Many thanks, > >> > >> Neil > >> > >> ------------------------------------ > >> Posted by: Neil Kagan <xxxxxx@xxx.xxx> > >> ------------------------------------ > >> > >> > >> ------------------------------------ > >> > >> Yahoo Groups Links > >> > >> > >> > > > > > > > > ------------------------------------ > > > > ------------------------------------ > > > > > > ------------------------------------ > > > > Yahoo Groups Links > > > > > > > > > ------------------------------------ > Posted by: Neil Kagan <xxxxxx@xxx.xxx> > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/