From Kenny Balys Sent Thu, Jul 26th 2018, 11:53
This may not be a popular opinion but I have reached the conclusion that the aesthetic of a studio is more important than the acoustic. My ideal environment is a bright room filled with art and light birchwood parket flooring with a view and space for everything. High ceilings too. Fresh air. Since this is a floor thread, I just love birchwood floors. They look great. I would take a beautiful space over a highly conditioned anechoic chamber with perfect stereo definition if those were the only choices. On 26.07.18 11:35 , skkatter wrote: > Bobby Owsinski recorded a great talk about how to treat rooms, > starting with the basics like where to put speakers etc, and doing it > all on a budget: https://youtu.be/1d9WmjTJniI > > He made an interesting point that it's the walls and ceilings that are > the most important when treating, and most studios don't actually do > much to the floor at all because it's natural for us to experience > reflections from the floor as most of the time when we're hearing > things we're standing on a surface of some sort. > > -Stephen > > On 26 July 2018 at 00:10, Quincas Moreira <xxxxxxx@xxxxx.xxx> wrote: >> I keep it simple: carpeting. Helps absorb reflections, feels warm and cozy, >> and you can choose one that looks good with your decor. And whatever's >> underneath doesn't matter. >> Every time I move into a new house and choose the studio space, the first >> thing I do is order carpeting for it. >> >> On Wed, Jul 25, 2018 at 2:44 PM negativesaucer <xxxxxxxxxxxxxx@xxxxx.xxx> >> wrote: >>> >>> sounds like a cheap man's isopuck >>> >>> On Tue, Jul 24, 2018, 10:35 PM Eric Wood <xxxx.xxxxxx@xxxxx.xxx> wrote: >>>> >>>> I’ve read somewhere about the hockey pucks and sand around them >>>> somewhere; I was gonna try it years ago when I owned my own home but never >>>> got around to it. >>>> Eric >>>> >>>>> On Jul 24, 2018, at 9:02 PM, alt-mode <xxx@xxx-xxxx.xxx> wrote: >>>>> >>>>> >>>>>> On Jul 24, 2018, at 4:02 PM, David Bivins <xxxxxxxx@xxxxx.xxx> wrote: >>>>>> >>>>>> I always thought it would be cool to float a floor of panels and run >>>>>> all the cabling under it. >>>>> >>>>> I did this in a previous basement studio where I had a high ceiling so >>>>> I had space for a raised floor. 2x6 pressure treated lumber was used over a >>>>> vapor barrier on cement. “Channels” were made to run down the middle of the >>>>> floor and “hatches” were cut into flooring. A durable carpet was glued onto >>>>> the flooring. The mistake was not to put the floor beams on neoprene or >>>>> some other isolating material. The raised floor resonated and putting a >>>>> subwoofer directly on the floor was too much at certain frequencies. Then >>>>> there was the problem of pulling the cables through the floor and having to >>>>> move gear around to get to a hatch. >>>>> >>>>> My current setup has the gear along the walls with “peninsulas" of gear >>>>> sticking out so all of the cabling is either along the walls or in a >>>>> peninsula. I can always get to the cables and I don’t have a floor that >>>>> acts like a resonator at low frequencies. >>>>> >>>>> Eric >>>>> >> >> >> >> -- >> Quincas Moreira >> Synth Diy Guy >