From yahoo Sent Tue, Mar 15th 2016, 10:18
From yahoo Sent Tue, Mar 15th 2016, 10:18
Hello James, thank you for the detailed annotation. If there are sufficient inquiries we could develop such an expansion unit. But I fear that this application is a bit too special (generally the A-152 is far a way from being a good seller) Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Dienstag, 15. März 2016 00:38 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: [Doepfer_a100] DIY cv out module to accompany A152 question > > > Since we are talking about expansion modules for the A-152, I thought I would put a suggestion for achieving something > similar with the A-154. I think a good and inexpensive expansion module for the A-154 would be a small panel with 8 jacks > that a stand alone A-154 would plug into, that would provide 16 sequentially addressed gate outs controlled by the A-154. > Basically a gate sequencer instead of the standard A-155. It would be nice if the module had a header to accept the > ribbon from the A-154 and also have a pass-through) header allowing the connection to more than one module to run in parallel. > > I have always loved the idea of a modular sequencer with all the functions of a classic sequencer broken out into > separate modules that could be combined to make a custom sequencer of your own design. With the A-154 as the brain of > the system, you could have expansion modules like this gate out module I just described, a small panel with pots for the > CV generating part (that could be chained for more rows), a 16-position sequential switch module, and other modules that > would connect up. This way you could design a sequencer with as many rows of CV out, Gate outs, Trigger outs, or > whatever you wanted. It could be as big or small as you wanted. > > I started to make a system like this with my PGM-4X4 series which can be stacked as high as you have cabinet space. in > programmer mode, it can address its columns using a internal, very basic, sequencer or manually or via external gates. I > currently run two of them with the outputs from a A-152 but the A-154 would be a MUCH better controller since it provides > clock outs too. > > I asked Dieter a long time ago about accessing the header on the A-152 and was given the pinout (Thanks Mr.D) which when > buffered for protection reasons, can provide a trigger when the A-152 changes stages. This makes the A-152 a much easier > module to use when using the CV stage address method. If a add-on expansion module was made for the A-152, adding this > trigger out would be a BIG plus for me. > > -James > > James Husted, Designer, Synthwerks LLC www.synthwerks.com xxxxx@xxxxxxxxxx.xxx xxxx@xxxxxxxxxx.xxx > > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/