From yahoo Sent Mon, Aug 6th 2018, 13:40
It depends upon your PC hard/software if the incoming note on/off data from the SQ-1 are routed to the Midi output which is connected to the A-190-4. You may use also the midi output of the SQ-1 (with the special midi adapter that comes with the SQ-1) to find out if the midi communication between SQ-1 and A-190-4 is working in principle. Pay attention that the midi channels of both devices are the same ! Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Montag, 6. August 2018 15:17 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: [Doepfer_a100] Problem with A-190-4 > > > The interplay among the korg SQ-1, the A-190-4 and eventually a > PC is not clear to me > Can the korg SQ-1 sequencer actually send MIDI via USB to the PC > and so to the A-190-4? > Maybe you can forward precisions of your hw configuration > > I had a similar problem long ago interfacing OSX 10.6.8 with the > A-190-4, so the master keyboard actually sent messages but the > A-190-4 wasn’t detected by the MIDI Audio setup sometimes (have > to keep the A-190-4 powered on before powering on the Mac). But > if your DAW sends clock to A-190-4 (but not MIDI notes!?) then > it’s not the case.. > Diego > > > > > Il giorno 06 ago 2018, alle ore 13:52, xxxxx@xxxxxxx.xx > [Doepfer_a100] <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> ha scritto: > > > > Hello, > > > > if the clock is working the midi connection is working in > principle. Please > > check if the midi channel and note range of the transmitter > corresponds to > > the settings of the A-190-4. And make sure that the required > note messages > > are really sent by the midi transmitter. > > > > Best wishes > > Dieter Doepfer > > > >> -----Ursprüngliche Nachricht----- > >> Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > >> Gesendet: Montag, 6. August 2018 13:01 > >> An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > >> Betreff: [Doepfer_a100] Problem with A-190-4 > >> > >> Hi All, > >> > >> > >> I am having a problem with my A-190-4 today and I'm hoping > >> someone may be able to assist. My A-190 does not appear to be > >> processing CV or Gate signal. I have tried sending signal from a > >> midi keyboard and from a korg SQ-1 sequencer but no CV or gate > >> signal is produced. I do get a clock signal when the sequencer > >> is attached. I have tried to different midi cables also just to > >> rule out a bad cable issue. > >> > >> > >> I can scroll through the menu on the A-190 so the module does not > >> appear to be frozen. > >> > >> > >> All connections are made using the midi in port, not USB. > >> > >> > >> Would anyone have advice on how to troubleshoot this problem? > >> > >> > >> Thanks, > >> Colum > > > > > > > > ------------------------------------ > > > > ------------------------------------ > > > > > > ------------------------------------ > > > > Yahoo Groups Links > > > > > > > > > > ------------------------------------ > Posted by: Diego Ragnini <xxxxxxx@xxxx.xx> > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/