From alt-mode Sent Sun, Aug 25th 2019, 02:07
What type of connector is on the MPC? Is it behaving as a host or a = device? The MatrixBrute is a device, not a host. Eric > On Aug 24, 2019, at 9:59 PM, Edward Schultheis <xxxxxxx@xxxxx.xxx> = wrote: >=20 > Shouldnt it power an led light as well? My mpc has usb midi, and it = can power my low power devices as well. > =20 >=20 > On Aug 24, 2019, at 6:45 PM, Mark S Glinsky <xxxxxxxx@xxxxxxxxx.xxx> = wrote: >=20 >> Thanks so much. I=E2=80=99ll just set up an LED strip on the bottom = of the shelf above it to provide illumination for the panel. >> =20 >> Mark=20 >> xxxxxxxx@xxxxxxxxx.xxx >> =20 >> -----Original Message----- >> From: alt-mode [mailto:xxx@xxx-xxxx.xxx]=20 >> Sent: Saturday, August 24, 2019 5:12 PM >> To: Mark S Glinsky >> Cc: xxxxxxxx@xxxxxxxxx.xxx >> Subject: Re: [AH] Arturia MatrixBrute >> =20 >> Mark, >> =20 >> The USB port on the MatrixBrute is for USB over MIDI so I don=E2=80=99t= think it will provide power for a lamp. You would likely want = something providing a Type A connector. The port on the MatrixBrute is = a Type B. >> =20 >> Eric >> =20 >> > On Aug 24, 2019, at 2:39 PM, Mark S Glinsky = <xxxxxxxx@xxxxxxxxx.xxx> wrote: >> >=20 >> > Does anyone have an Arturia MatrixBrute? Have you tried using a = USB gooseneck light connected to the USB port on the rear panel, to = provide lighting for the front panel (similar to the lights on Moog = Voyagers and XLs). >> > =20 >> > Mark=20 >> > xxxxxxxx@xxxxxxxxx.xxx