From yahoo Sent Tue, Jan 2nd 2018, 08:35
From yahoo Sent Tue, Jan 2nd 2018, 08:35
We handed over a few prototypes of the A-180-9 to customers who use the A-100 very intensively (live on stage and in the studio) before we started the production to find out if there may occur any crosstalk or voltage loss problems. Even worst-case scenarios were tested (e.g. 15V gate signals and audio signals over a 2m cable) and none of the testers reported any problems. And the connection includes a common GND provided that network cables with shield are used (see my other answer in this regard). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Samstag, 30. Dezember 2017 23:13 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: [Doepfer_a100] A180-9 multicore > > > > > Not related to this issue, but will there be a problem because of > the use of twisted pairs? Couldn't patching a 'noisy' signal in > the same pair as, say, a 1V/Octave for a VCO, or with an audio > signal lead to possible issues?. > > Also surprised that as an inter-system connector, that it does > not provide a common ground connection > > Best Regards > > Laurie Biddulph > Mobile.......: +61 0400 257 645 > Phone.......: +61 02 4340 0938 > Skype.......: widgetoz > > > ELBY Designs > 9 Follan Close > Kariong > NSW 2250 > Australia > ABN: 70 022 727 605 > 2017 - Year of the EuroSerge Rooster > > On 30/12/2017 10:43 PM, Jacco Ville xxxxxxxxxx@xxxxx.xxx > [Doepfer_a100] wrote: > > Seems there are cross-cables also.... > Im not very familiar with CAT cables but when this module was > introduced I took a small dive into this kind of connections > because the provided cable is a bit short. > > > > Sent from my IPhone. > > Op 30 dec. 2017 om 11:31 heeft Neil Kagan xxxxxx@xxx.xxx > [Doepfer_a100] <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> het volgende geschreven: > > > > Do they use a cat5e or cat6 cable? The connector will be the same. > > > Neil > > > Sent from my iPhone > > On 30 Dec 2017, at 09:53, Jonathan xxxxx@xxx.xxx [Doepfer_a100] > <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> wrote: > > > > Hi everyone. Almost Happy (Christian) New Year. I bought myself a > pair of the new multicore modules as a Xmas treat (how incredibly > useful in a large system Dieter - amazing that no-one has thought > of it before). I have a very odd problem - The modules link > perfectly with the cables supplied but they are only very short. > When I try any other network cables however nothing seems to > connect. I have checked the cables by linking my laptop to the > router and that works fine, but I get no connections at all when > I use them between the A180-9s. One of them is 1m long and two > are 3m. Any suggestions please? > Jonathan > >From my iPad Air > > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/