From yahoo Sent Mon, Jul 6th 2015, 14:11
From yahoo Sent Mon, Jul 6th 2015, 14:11
From the theory it should make no difference because each group with the four blade terminals is connected to the same signal (-12V, GND or +12V) because the four terminals of each group are shortened. I have no idea why wiring them identically solved the problem. Anyway - it's good tp know that now everything is fine. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Samstag, 4. Juli 2015 09:14 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] Re: trouble with VC patching to second G6 frame > > > > > in short the grounds were wired differently on each frame. The solution was to wire them identically. > > Here is what they looked like before (problem state). I made them both look like the right side photo. > > https://groups.yahoo.com/neo/groups/Doepfer_a100/photos/albums/1830938856/lightbox/448632445?orderBy=ordinal&sortOrder=asc > &photoFilter=ALL#zax/448632445 > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/