From Florian Anwander Sent Wed, Feb 18th 2015, 13:12
From Florian Anwander Sent Wed, Feb 18th 2015, 13:12
Am 18.02.2015 um 09:50 schrieb xxxxx@xxxxxxx.xx [Doepfer_a100]: >> assume I have to remove the 3.5mm >> jack screws on the top of the casing? What's the proper tool to do so? >> > You need a suitable socket wrench (about 11 mm). Even pliers may be used but this increases the risk to damage the case and nuts. > Hello Frank If you don't have a wrench set, then you may use a universal plier with a protecting adhesive tape like seen here: http://fa.utfs.org/diy/monopoly_mirage/images/100-0055_IMG.jpg Florian ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/