From yahoo Sent Fri, Dec 16th 2016, 08:41
The output level of the A-111-5 was defined by a resistor (R66, standard value 47k). If the resistor is replaced you may change the output level (e.g. 100k for twice the level). In this regard another question to all members: We receive a lot of inquiries for the A-111-5 in the vintage version. If anybody knows a reliable source for CEM3394 (not only one piece but at least a few) please let me know. If we can find a noteworthy quantity we may manufacture a limited vintage version of the A-111-5. Thank you Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Freitag, 16. Dezember 2016 07:06 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A-111-5 Volume > > > Hello again, > > I have found a second A-111-5 for my Doepfer box (I have enough > modules than one P-6 case is largely Makenoise, another P-6 is > largely Doepfer and there are some LC cases as well). Joy! Wish I > could find these new, but since I cant, I have to pick them up > second-hand. > > I connected them both up and they sound splendid. No real tuning > issues I need to care about. The only thing that mystifies me is > that one unit is a bit louder than the second no matter how I > plug things.One seems to be a bit below typical Eurorack > levels. Not terribly so, but still significant enough that it > would require me to constantly work around it by changing the > output level. Could it be that one VCA knob is out of alignment? > I am still quite new to the A-111-5. Perhaps there is something I > am missing? I have an OTool Plus that I can use as a voltmeter > or levels meter. If I am to adjust trimming pot R23 (have not > tried), is there a set volume or voltage that I should tune both to? > > I appreciate this forum so much! > > Thanks! > > Kazys ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/