Re: [AH] DIN Sync: Pin 5 Continue or Fill In?

From Kenny Balys
Sent Mon, Jun 25th 2018, 09:15

Thank you very much! :)


On 25.06.18 09:10 , Florian Anwander wrote:
> Hi Kenny
>
> Both signals are definitely not required.
>
> I think the only devices that ever used the continue were the CSQ-600 as master with the TR-808 as slave. I have never found any other device. Even the SBX-80 does not send continue.
> Same with fill in. To my knowledge even the TR-606 does not support it. The only combination, that uses fill in is TR-808->TR-808.
>
>
> Florian
>
> __
>
>
>
> Am 25.06.2018 um 11:02 schrieb Kenny Balys:
>>
>> Hi Synth Gods,
>>
>> Do I need to implement Pin 5 of DIN sync?
>>
>> Some specs say it is Continue and some say Fill In.
>>
>> I suppose these must vary from machine to machine.
>>
>>
>>
>