From yahoo Sent Fri, Mar 18th 2016, 11:57
A-111-2: triangle core: yes frequency range: ~ 14-15 octaves waveforms: tri, saw, pulse, sine linear FM: yes (manual control, down to ~zero + CV input with attenuator) exponential FM: yes (manual control + CV input with attenuator) PWM: yes (manual control + CV input with attenuator) hard sync: yes soft sync: yes TZ FM: no (this will follow in another new VCO A-111-4?, not yet included in the A-111-2 and a more expensive) wave folder: no second VCO: no (from my point of view another VCO can to the same job) A-111-3: slim version of the A-111-2, 4HP only, less controls and less in/outputs Details will follow soon on our website Best wishes Dieter Doepfeer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Freitag, 18. März 2016 11:56 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: AW: [Doepfer_a100] DIY cv out module to accompany A152 > question > > > > > > > New High-End VCO...wow! will it be triangle core? > > i guess it will include linear and exp FM, TZ FM of course. > > will it have an on-board wave folder ? will it have an on-board modulation (2nd) vco ? > > > > > > > From: "xxxxx@xxxxxxx.xx [Doepfer_a100]" <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> > To: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Sent: Friday, March 18, 2016 11:23 AM > Subject: AW: [Doepfer_a100] DIY cv out module to accompany A152 question > > > I'll see if that's possible. But at the moment I'm snowed under with work because I have to prepare for the Superbooth in Berlin. > The prototypes of a few new modules have to be finished (e.g. a new high end VCO, a micro VCO with 4HP only and a performance > mixer). > > Best wishes > Dieter Doepfer > > > > > -----Ursprüngliche Nachricht----- > > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > > Gesendet: Donnerstag, 17. März 2016 23:33 > > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > > Betreff: Re: [Doepfer_a100] DIY cv out module to accompany A152 question > > > > > > Dieter - > > The A-152 is a bit of a specialty module for sure. To many the features are very obscure. I imagine that most people > > mainly use the Digital outs and not many use the other columns very much. For me that is the case anyway. The Voltage > > addressable digital outs is a vert cool feature and the main one I use on it. It is not a very expensive module though so > > other than space reasons, it is a great module to have. > > > > Here is a simple addition that would do basically what I originally talked about with a A-154. This would add the voltage > > addressed digital outs to a A-154. How hard would it be to create a cable that would connect a A-154 to two A-161 (or > > maybe two A-149-2) modules? With an adaptor cable like that, An A-154 and two A-161s would make a great little 16 step > gate unit. > > -James > > > > James Husted, Designer, Synthwerks LLC www.synthwerks.com xxxxx@xxxxxxxxxx.xxx xxxx@xxxxxxxxxx.xxx > > > > > > > > > On Mar 15, 2016, at 3:18 AM, xxxxx@xxxxxxx.xx [Doepfer_a100] <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> wrote: > > > > > > Hello James, > > > > > > thank you for the detailed annotation. If there are sufficient inquiries we could develop such an expansion unit. But I > > fear that > > > this application is a bit too special (generally the A-152 is far a way from being a good seller) > > > > > > Best wishes > > > Dieter Doepfer > > > > > > > > > > > > > > > ------------------------------------ > > > > ------------------------------------ > > > > > > ------------------------------------ > > > > Yahoo Groups Links > > > > > > > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > > > > > > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/