From negativesaucer Sent Tue, Feb 27th 2018, 16:29
From negativesaucer Sent Tue, Feb 27th 2018, 16:29
yeah I'm not sure this was addressed in hardware revisions but the BSP has a notoriously failure-prone usb port. I opted for one of those magnetic USB cables so that if there is any stress put on the jack, it will disconnect rather than break the jack off. On Mon, Feb 26, 2018 at 1:51 PM, Tim Burgess <xxx@xxxxxxxxx.xxx> wrote: > Hi Kylee, > > > > I hear what you=E2=80=99re saying, but my cable fell foul of my sonJ Work= s fine with > the new cable that arrived a couple of hours ago. > > > > I=E2=80=99ve now sorted out my transposition issue, though I haven=E2=80= =99t figured out > what I was doing wrong. I=E2=80=99m grateful to all who offered an assist= . > > > > Best wishes. > > > > Tim Burgess > > > > From: Kylee Kennedy [mailto:xxxxxxxxx@xxxxx.xxx] > Sent: 26 February 2018 18:43 > To: Tim Burgess <xxx@xxxxxxxxx.xxx> > Subject: Re: [AH] BeatStep Pro transposition > > > > Sure it's a faulty cable? Almost all the early Beatstep Pros had weak and > prone to fault jacks. I had to solder my USB straight onto the PCB for it= to > work at all anymore. > > > > Kylee > > > > On Monday, February 26, 2018, Tim Burgess <xxx@xxxxxxxxx.xxx> wrote: > > Hi Quincas, > > > > Many thanks for testing for me. I got thwarted last night by a faulty USB > cable, so I=E2=80=99m just waiting for Amazon to deliver some spares then= I=E2=80=99ll > re-test. If I still can=E2=80=99t get things right, I=E2=80=99ll gladly i= mpose on your > kindness =E2=80=93 how would I contact you, please? What time zone are yo= u in? > > > > Best wishes. > > > > Tim Burgess > > > > From: Quincas Moreira [mailto:xxxxxxx@xxxxx.xxx] > Sent: 26 February 2018 02:14 > To: xxxxxx@xxxxxx.xxx > Cc: analogueheaven <xxxxxxxx@xxxxxxxxx.xxx> > Subject: Re: [AH] BeatStep Pro transposition > > > > Hey Tim, it worked for me! > > > > I did just like you said, recorded a sequence, saved it, then transposed = it > and saved it in a different slot. Then I chained the patterns by holding > shift plus the sequence button, then pressing the numbers for the sequenc= es > I wanted to chain. The sequences retained the saved transposition state. > > So yeah, it's not a limitation of the device, the feature is there, do yo= u > have the latest firmware? I think I have 2.0 > > Let me know if you'd like to live chat and I can talk you through it. > > Cheers > > > > Quincas (pronounced Keen Kahs) > > > > On Sun, Feb 25, 2018 at 8:47 AM, <xxxxxx@xxxxxx.xxx> wrote: > > Handy tutorial. It does look like he transposes and saves in the usual > manner. Then he states that the transposition has been saved. > > > > > > -------- Original Message ---------- > > Hi, > > > > Trying to answer my own question, I listened to the tutorial at: > > > > https://www.youtube.com/watch?v=3DO_3pnbTq26o > > > > In the section starting around 23:36, the demonstrator is talking about > transposition and indicates that it is saved with the pattern, so I must = be > doing something wrong. For those that don=E2=80=99t know, I=E2=80=99m bli= nd, so can=E2=80=99t see > exactly what he does in the video. Can anybody help me out, please? > > > > Best wishes. > > > > Tim Burgess > > > > > > -------- Original Message ---------- > > Hi, > > > > Trying to answer my own question, I listened to the tutorial at: > > > > https://www.youtube.com/watch?v=3DO_3pnbTq26o > > > > In the section starting around 23:36, the demonstrator is talking about > transposition and indicates that it is saved with the pattern, so I must = be > doing something wrong. For those that don=E2=80=99t know, I=E2=80=99m bli= nd, so can=E2=80=99t see > exactly what he does in the video. Can anybody help me out, please? > > > > Best wishes. > > > > Tim Burgess > > > > > > > > -- > > Quincas Moreira > Test Pilot at VBrazil Modular