From doug Sent Mon, Jan 28th 2019, 21:38
Good point, I was assuming the Emulator II supported MIDI SysEx, since the Emax does (which was based on the Emulator II), but the lack of SysEx support would explain why the MIDI discussion in the user manual does not mention it. At least the Emax manual mentions to call Emu for SysEx documentation. --- Doug Huseby http://synthark.com http://synthark.org On 2019-01-25 15:14, Sevo Stille wrote: > Am 23.01.2019 um 22:00 schrieb xxxx@xxxxxxxx.xxx: >> Does anyone have the MIDI SysEx spec for the Emu EmulatorII? I want >> to build a programmer, but am striking out in the User Guide. > Did it have SYSEX dumps? IIRC the (Mac?) editing software that existed > in 86 or so was limited to the RS422 serial port of the EII for bulk > data transfers. I did work on it for a while back then, but we (Atari > Germany) found no way to support the EII for the period Atari MIDI > librarians - if there was a Sysex-only bulk dump solution it must have > come with some later firmware (or some posthumous firmware hack). > > regards Sevo