From yahoo Sent Wed, Feb 18th 2015, 08:50
> Thanks Mr. Doepfer! > > > Since I will have to remove the Supply/Interface Board to reach the DE's CEM3394, I assume I have to remove the 3.5mm > jack screws on the top of the casing? What's the proper tool to do so? > > > thanks so much and kind regards > Frank You need a suitable socket wrench (about 11 mm). Even pliers may be used but this increases the risk to damage the case and nuts. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/