From yahoo Sent Mon, Jan 8th 2018, 08:42
From yahoo Sent Mon, Jan 8th 2018, 08:42
Hello Michael, I'm sorry about the problems with the module. Please check if the jumper that connects the CV out to the bus is removed (to eliminate a problem caused by another CV transmitter on the same bus board). If that's fine I assume that the fault is caused by be a broken glide potentiometer (or broken wire) and I ask you to return the module to Thomann for repair. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Sonntag, 7. Januar 2018 16:20 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A-190-3 apparent failure > > > Hi, > My A-190-3 MIDI module has apparently failed on the CV output. On > my 'scope it shows -5v constant and there is no variation in the > note pitch when connected to V/octave socket on any of my > oscillators. I drive it from my MAQ 16/3 and I've checked the > MIDI out on that with a Kenton Control Freak SE in its MIDI > analyser mode and that is perfect. > The gate output of the A-190-3 is operating perfectly. > My question is, is there anything I can check before sending it > back to Thomann as it is still under warranty? > > > Regards, > Michael. > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/