From yahoo Sent Tue, Sep 22nd 2015, 13:40
> Hi > Is it possible to modify the A186-1 OR Combiner so it could be two 4 IN 1 OUT combiners instead of one 8 IN 1 OUT combiner? > > How ? > > Many Thanks > > Ricardo If you are familiar with electronics this should be no problem. The simple schematics is shown on the info page of the A-186-1 on our website. You have to interrupt some pcb tracks, re-wire some sockets and add a second pull down resistor for the second unit. But as there are only 8 sockets available you can realize only two 3-in-1 combiners. I'd interrupt the pcb in the middle (between socket #4 and #5). Then the lower 4 sockets are already a 3-in-1 combiner. Then you have to modify the upper section so that it's a copy of the lower section (i.e. replace diode #4 by a wire and add the second 10k pull down resistor for the upper unit). Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/