From doug Sent Sun, Sep 30th 2018, 17:05
On 2018-09-29 14:12, matrix wrote: > > If you look at Casio's VZ-1 there are buttons with LEDs that allow you > to enable and disable each operator. I would love an FM synth that > had similar buttons above a control section that instead of enabling > or disabling the operators, they enabled or disabled the controls for > each operator. That way you could select what operators were affected > by the FM depth, harmonic control, etc.. Even with the Jellinghaus > and Detronics DT7 I think you have to adjust each parameter separately > vs. having groupings you can assign. The DX7 programmer I've designed allows multiple operator editing by using a common set of controls for the operators (and switches to select the operators to edit), which reduces cost significantly and makes the programmer smaller (3U rack), but sacrifices dedicated sliders for each operator. I put the development on hold to focus on other programmers, once the DT7 was announced, but perhaps it's time to thaw the project. --- Doug Huseby http://synthark.com http://synthark.org