From sam Sent Thu, Apr 5th 2018, 18:12
From sam Sent Thu, Apr 5th 2018, 18:12
We did just receive our shipment of the Juno 6/60 slide pots, and they should be available on our site by the end of the day. I think the Jupiter 4 uses slide pots with different mounting lugs. I will pop open a JP4 shortly and see whether the Juno sliders can be made to work. If the solder lug configuration is the same, then it will be relatively easy to work around the mounting lug issue. Sam Mims Syntaur On 4/5/2018 5:37 AM, Jesús Gallego wrote: > Hi, I’m new to the list although I’ve been lurking for some time. > > I’ve seen there’s an eBay seller with sets of slider clones for Juno > 6/60 just released here: > https://www.ebay.es/itm/Roland-Juno-60-Slide-Potentiometer-Full-Replacement-Kit-Pot-Spare-Part-Brand-NEW/173252505924?hash=item2856a77144:g:u0kAAOSwYgFaxDJ8 either > in sets or individually. > > I recently got a Jupiter 4 which should need to replace at least one > 50k slider and refurbish a few more, so I was thinking these should be > the same dimensions with a different pinout. Would you guys think > there could be a way to easily adapt the pinout of the Juno sliders to > the JP4 or is this physically impossible? I find it hard from the > schematics I have to figure out the JP4 slider pinout. > > Also, I’ve heard Sam Mims was working on similar clones but not sure > if they’re into making Jupiter clones too, so it’d be nice to have > some info in advance prior to ordering these and working on adapting them. > > Thanks to all for all the help. > >