From yahoo Sent Fri, Nov 27th 2015, 09:11
> Hi to you all, y'aaalll > > > > I'm still busy with a huge project to renew some components of my good old Doepfer modules [more than 25]. > But to make a long story short: I need to replace diodes too, for they do not measure well (diode test) and some of the > modules have little malfunctions [e.g. A-146, A-147]. > > But when I was looking to buy them, I noticed they were with different ampere's. > Who knows which ampere value suites the Doepfer modules? > > > I thank you in advance, than I do not have to send a special email to thank you; so I do not waste your quality time. It's very improbable that diodes are defective (but who knows). The diode type is printed on the diode - although very small. In most cases 1N4148 is used. If small blue diodes are used these are BAT42. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/