From Mike Beauchamp Sent Thu, Dec 27th 2018, 03:44
On 12/26/18 9:46 PM, Brian Willoughby wrote: > I design with the CUI Inc. SDS-50J, which, upon further consideration, = wouldn=E2=80=99t be good for a DIY MIDI patch panel because they=E2=80=99= re PCB Mount, not panel mount. I suppose that if you =E2=80=9Cwanted=E2=80= =9D to design a PCB for this and solder everything, it might be workable,= but that seems unlikely unless you want captured cables inside the rack = that cannot be unplugged on the panel side. CUI SDS-50J is panel-mountable using three #2 pointed screws into the=20 plastic holes. I'm not sure if I'd trust it on a commercial design, but=20 it's holding up on my DIY midi-splitter fine. Mike