From yahoo Sent Tue, Jul 21st 2015, 08:43
> Hello, > > looking at the triangle wave of the 110-2, there is a glitch at the end which gives it quite an audible "buzz" on top of > the triangle sound. > > IMG_20150709_174337.jpg > > IMG_20150709_174337.jpg > View on drive.google.com Preview by Yahoo > > is there a way to calibrate that away somehow? > > Regards, > > Vladimir In the A-110-2 the triangle is derived from the sawtooth via waveshaping (in case of the A-110-2 that's a precision rectifier which mirrors the sawtooth wave when it reaches negative values). Sorry - there is no trimming potentiometer available. As a rule you will always obtain a glitch when a triangle or sine is derived from a sawtooth. The reason is that the "reset" of the sawtooth is not infinitely fast but takes a while. In reality a sawtooth is consequently an extremely asymmetric triangle with a slow slope (the typical sawtooth slope) and a very short reset slope. This reset slope is what you see as a glitch in every triangle that is derived from a sawtooth by means of waveshaping. The only way to remove it would be a tracking filter or the usage of a triangle core based VCO like the A-111-1 (or the planned successor of the A-111-1 high end VCO, but this module is still under development). Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/