From yahoo Sent Thu, Jan 7th 2016, 08:16
From yahoo Sent Thu, Jan 7th 2016, 08:16
> Hello Dieter, > > > I'm currently facing a situation I don't understand with the MAQ. Firmware is v3.00. > I have row 1 set to nA1 or nr1, and row 2 set to Ad1. Yet the position of the knobs of row 2 don't change anything in the > pitch set at row 1 sent via CV to a euro format oscillator. > > Is there some setting I forgot to this set up or is Ad1 not working with v3.00 or something of the kind ? > Thanks for your possible advices. > > > Regards, > > Phil Please contact Christian Assall (xxxxxxxx@xxxxxxx.xx). He programmed all firmware versions of the MAQ16/3. V3.00 is a very old version of the firmware (~ 1995, i.e. about 20 years) and maybe this function was not working. But I'm not sure if Christian will be able to answer your question as this version was programmed 20 years ago. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/