AW: [Doepfer_a100] A-140 repair

From yahoo
Sent Tue, Jan 7th 2014, 13:11

I'd recommend to replace the (low cost) integrated circuits TL084 and
CD4001. If this does not help you may contact the Doepfer representative in
your country (e.g. EMIS if you are in the UK). Andy of EMIS is very
experienced with A-100 repairs.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx
> [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx]Im Auftrag von
> xxx@xxxxxxxxxxx.xx.xx
> Gesendet: Sonntag, 5. Januar 2014 19:21
> An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx
> Betreff: [Doepfer_a100] A-140 repair
>
>
>
>
>
> Hi
>
>
> I have just plugged an A-140 into my bus board the wrong way
> round and it no longer triggers when fed a gate signal.
>
>
> Does anyone have any pointers as to what I have most likely fried
> and need to replace.
>
>
> Thanks in advance
>
>
>
> 



------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
    (Yahoo! ID required)

<*> To change settings via email:
    xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx 
    xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> To unsubscribe from this group, send an email to:
    xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/