From yahoo Sent Thu, Feb 16th 2017, 08:28
From yahoo Sent Thu, Feb 16th 2017, 08:28
There should be no difference in this regard between the old CEM3340 and rev.G. Let me know if you can confirm that Juergen Haibles TZ circuit does work. Our TZ circuit is a bit different and would offer more possibilities (e.g. an additional control for the TZ "smoothness", i.e. if there is a soft transition at f=0 as usual or a voltage jump before the wave continues which generates additional overtones). But as already mentioned it does not yet work as it should. Best regards Dieter Doepfer > Good to hear that this developement is still in the pipeline! One > of the things that im curious of is if the old JH3 dual vco > schematic works with Rev.G, i also posess 2 A-111(-1) for doing > test but i dont want to mess up an older type 3340 by poking > around finding the right pin to insert a sync signal from > another. Whenever i do have (safely) done some tests with results > ill post it here. > > Posted by: xxxxxxxx@xxxxxx.xx ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/