From yahoo Sent Tue, Mar 27th 2018, 14:51
> Hi group, > I got a question on how to calibrate the precision adder. > Any info welcome. > Jacco Step 1: adjustment of the internal 1V steps adjust P2 so that the meter reads +1.00V, measured at the center pin of P2 Step 2: adjustment of the amplification adjust P1 so that at the output appears +4.00V with all switches to "+" position and Lev.1 control fully CW Good luck Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/