From skkatter Sent Sat, Oct 20th 2018, 08:25
From skkatter Sent Sat, Oct 20th 2018, 08:25
First of all, you need to figure out if the problem is the SE Code, the Motu, Reaper, or your computer, or even something else. If you try exactly the same set-up with a different synth is it also out of time? How bad does it sound, have you got an example we could listen to? -Stephen On Fri, 19 Oct 2018 at 23:56, Royce Lee <xxxxxxxxxx@xxxxx.xxx> wrote: > > Omega Code does not have an arpeggio. It was replaced by filter tables, w= hich mystify me. > > The Code price point is interesting in relation to the One. I bet the ci= rcuit boards look very different. > > But I would be surprised if the Code has sloppy timing, it has seemed pre= tty good to me. > > > > > > On Fri, Oct 19, 2018, 5:44 PM Andrew Dean <xxxxxxxxxxxxx@xxxxx.xxx> wrote= : >> >> That would mean that the 8 part multitimbral synth that costs as much as= a Moog One can=E2=80=99t handle one channel of notes + clock? >> >> That would be... dissapointing... >> >> On Sat, 20 Oct 2018 at 11:18 AM, Eric Frampton <xxxx@xxxxxxxxxxxx.xxx> w= rote: >>> >>> Gotcha. If you=E2=80=99re not sync=E2=80=99ing LFO=E2=80=99s or anythin= g else in the CODE to MIDI, I=E2=80=99d turn MIDI clock OFF, since it=E2=80= =99s only going to clog up the data stream and potentially throw your note = timing off a bit. >>> >>> >>> On Oct 19, 2018, at 6:11 PM, Andrew Dean <xxxxxxxxxxxxx@xxxxx.xxx> wrot= e: >>> >>> The CODE is just playing the notes. The note events are coming from the= MegaBaby software step seq on Reaper >>> >>> On Sat, 20 Oct 2018 at 11:09 AM, Eric Frampton <xxxx@xxxxxxxxxxxx.xxx> = wrote: >>>> >>>> Just curious, what are you using MIDI clock for on the CODE? >>>> Is all the arpeggiation happening within the computer, or does the COD= E do something there too? >>>> >>>> e >>>> >>>> > On Oct 19, 2018, at 5:59 PM, Andrew Dean <xxxxxxxxxxxxx@xxxxx.xxx> w= rote: >>>> > >>>> > So the other day I was sequencing something in imitation of a JP8 ar= oeggiator >>>> > >>>> > The signal path was Reaper on Windows 10 (running MegaBaby step seq)= -> MOTU microlite -> SE CODE >>>> > >>>> > Anyway the resulting groove was, shall we say, less than tight. >>>> > >>>> > Does this mean I need a dedicated hardware clock? Or am I missing so= me basic config step to tighten things up? >>>> > >>>> > Thanks! >>>> >>>