From Edward Schultheis Sent Sun, Aug 25th 2019, 04:13
From Edward Schultheis Sent Sun, Aug 25th 2019, 04:13
Well, ive hooked up qwerty keyboard to it, as well as an arturiA keyboard co= ntroller, which it powers from usb... as well as my iphone... which was thro= ugh the camera connector, so it wasn't charging, so have not tried it. =20 > On Aug 24, 2019, at 7:09 PM, alt-mode <xxx@xxx-xxxx.xxx> wrote: >=20 > What type of connector is on the MPC? Is it behaving as a host or a devic= e? The MatrixBrute is a device, not a host. >=20 > Eric >=20 >> On Aug 24, 2019, at 9:59 PM, Edward Schultheis <xxxxxxx@xxxxx.xxx> wrote:= >>=20 >> Shouldnt it power an led light as well? My mpc has usb midi, and it can p= ower my low power devices as well. >>=20 >>=20 >>> On Aug 24, 2019, at 6:45 PM, Mark S Glinsky <xxxxxxxx@xxxxxxxxx.xxx> wro= te: >>>=20 >>> Thanks so much. I=E2=80=99ll just set up an LED strip on the bottom of t= he shelf above it to provide illumination for the panel. >>>=20 >>> Mark=20 >>> xxxxxxxx@xxxxxxxxx.xxx >>>=20 >>> -----Original Message----- >>> From: alt-mode [mailto:xxx@xxx-xxxx.xxx]=20 >>> Sent: Saturday, August 24, 2019 5:12 PM >>> To: Mark S Glinsky >>> Cc: xxxxxxxx@xxxxxxxxx.xxx >>> Subject: Re: [AH] Arturia MatrixBrute >>>=20 >>> Mark, >>>=20 >>> The USB port on the MatrixBrute is for USB over MIDI so I don=E2=80=99t t= hink it will provide power for a lamp. You would likely want something prov= iding a Type A connector. The port on the MatrixBrute is a Type B. >>>=20 >>> Eric >>>=20 >>>> On Aug 24, 2019, at 2:39 PM, Mark S Glinsky <xxxxxxxx@xxxxxxxxx.xxx> wr= ote: >>>>=20 >>>> Does anyone have an Arturia MatrixBrute? Have you tried using a USB go= oseneck light connected to the USB port on the rear panel, to provide lighti= ng for the front panel (similar to the lights on Moog Voyagers and XLs). >>>>=20 >>>> Mark=20 >>>> xxxxxxxx@xxxxxxxxx.xxx >=20