From Brian Willoughby Sent Mon, Mar 5th 2018, 20:31
Note that the software does have some templates for basic things like 3U = rack faces. Start with those and edit the width to 8HP or whatever you = want, referencing the Doepfer site for specific measurements. I recall a = dialog box for editing dimensions where certain common values are = available in a popup, so look around. The screw placements can be rather particular, so pay careful attention = to the rules. Brian On Mar 5, 2018, at 10:23 AM, Kenny Balys <xxxxx@xxxxxxxx.xxx> wrote: > Thanks Thomas, but I was hoping for templates to save myself those 5 = minutes :) >=20 > I am aware there is a Yahoo group where public domain files are locked = behind their acccount system. Not interested in joining Yahoo: I will = not support this kind of data hoarding. >=20 > Sigh,... ok, I will DIY then. >=20 > On 05.03.18 18:18 , Thomas Krugman wrote: >> It will take you 5 minutes in fpd to draw anything you want following >> the specs: >> http://www.doepfer.de/a100_man/a100m_e.htm >>=20 >> On Sun, Mar 4, 2018 at 2:25 PM, Kenny Balys <xxxxx@xxxxxxxx.xxx = <mailto:xxxxx@xxxxxxxx.xxx>> wrote: >>> Front panel express eurorack templates anywhere? >>=20 >=20