From yahoo Sent Wed, Dec 9th 2015, 13:27
From yahoo Sent Wed, Dec 9th 2015, 13:27
> Hello again from Holland,
>
> Today I received my A187-1 DSP module.
> Manual says it's possible to reduce current from 200mA to 140mA by switching off the backlight.
> How do I do that?
>
> Greetings
>
> Jacco
For this you have to remove R33 (22 Ohm) on the top edge of the pcb (e.g. pinch off one of the terminals of the resistor).
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/