From yahoo Sent Fri, Sep 28th 2018, 09:39
From yahoo Sent Fri, Sep 28th 2018, 09:39
Hello, I'm sorry - no news so far. It's still in the holding pattern ... Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Freitag, 28. September 2018 10:39 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: AW: AW: [Doepfer_a100] Question regarding the A-126-2 > > > > > > Hello Dieter, > Is there any news on the new A-126-2 frequency shifter (combo) module? > --- > > Greetings, > > 9-0-9 > > > On 2017-06-08 09:44, Neil Kagan xxxxxx@xxx.xxx [Doepfer_a100] wrote: > > Understood! > > Thanks again, > > Neil > > Sent from my iPhone > > > On 8 Jun 2017, at 08:43, xxxxx@xxxxxxx.xx [Doepfer_a100] > <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> wrote: > > > > Yes, the sine/cosine outputs of the A-110-6 may be used. But as they are > > derived by waveshaping from triangles the waveforms are not as > perfect as > > sine/cosine from VCOs with sine/cosine core. For best results > I'd recommend > > a VCO with sine/cosine core. > > > > Best wishes > > Dieter Doepfer > > > >> -----Ursprüngliche Nachricht----- > >> Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > >> Gesendet: Donnerstag, 8. Juni 2017 09:33 > >> An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > >> Betreff: Re: AW: [Doepfer_a100] Question regarding the A-126-2 > >> > >> > >> Ok thank you Dieter. I'll keep the blank panel in place for now > >> then. Can I ask (this may be stupid!) as I have one of the new > >> A-110-6 in order; will this also be a suitable VCO to use as a > >> quadrature source? > >> > >> Neil > >> > >> Sent from my iPhone > >> > >>> On 8 Jun 2017, at 08:25, xxxxx@xxxxxxx.xx [Doepfer_a100] > >> <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> wrote: > >>> > >>> Neil, > >>> > >>> it's too early to specify the width as it will depend upon > the features > >>> included in the planned new frequency shifter module (i.e. built-in > >>> quadrature VCO or connection for external VCO like > >> A-110-4/A-143-9, built-in > >>> squelch circuit with envelope follower and VCA ...). > >>> > >>> Best wishes > >>> Dieter Doepfer > >>> > >>>> -----Ursprüngliche Nachricht----- > >>>> Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > >>>> Gesendet: Mittwoch, 7. Juni 2017 22:57 > >>>> An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > >>>> Betreff: [Doepfer_a100] Question regarding the A-126-2 > >>>> > >>>> > >>>> Hi Dieter, > >>>> > >>>> I have got to the point with my A-100 system where I am now close > >>>> to running out of space. I am happy with its size and don't want > >>>> it to grow further; however I am committed to leaving a space for > >>>> the eventual release of the A-126-2. Could you let me know if you > >>>> will be keeping it at 8HP? > >>>> > >>>> Many thanks, > >>>> > >>>> Neil > >>>> > >>>> ------------------------------------ > >>>> Posted by: Neil Kagan <xxxxxx@xxx.xxx> > >>>> ------------------------------------ > >>>> > >>>> > >>>> ------------------------------------ > >>>> > >>>> Yahoo Groups Links > >>>> > >>>> > >>>> > >>> > >>> > >>> > >>> ------------------------------------ > >>> > >>> ------------------------------------ > >>> > >>> > >>> ------------------------------------ > >>> > >>> Yahoo Groups Links > >>> > >>> > >>> > >> > >> > >> ------------------------------------ > >> Posted by: Neil Kagan <xxxxxx@xxx.xxx> > >> ------------------------------------ > >> > >> > >> ------------------------------------ > >> > >> Yahoo Groups Links > >> > >> > >> > > > > > > > > ------------------------------------ > > > > ------------------------------------ > > > > > > ------------------------------------ > > > > Yahoo Groups Links > > > > > > > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/