AW: [Doepfer_a100] Re: How to plug 2 psu3 with 1 power inlet

From yahoo
Sent Wed, Jun 1st 2016, 14:53

> I'm also curious about this. Looks like nobody has chimed in with an answer yet.

Two or more power supplies can be connected to one mains inlet. Ony simply has to install the correct fuse into the inlet (twice the
value for one PSU in case of two PSUS) and wire the mains inputs of both supplies in parallel to the mains inlet.

But as these works affects parts, pc boards and cables that conduct mains voltage (230/115V) carrying out of these works is allowed
only for experts or authorized personnel who are familiar with all valid safety rules. Laymen are not allowed to carry out these
works ! Danger to Life.

Additional information (for experts only) is available on the FAQ page of our website:

www.doepfer.com > FAQ > A-100 > Wiring the mains inlet, the power supply board and the bus boards


Best wishes
Dieter Doepfer





------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
    (Yahoo! ID required)

<*> To change settings via email:
    xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx 
    xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> To unsubscribe from this group, send an email to:
    xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/