From yahoo Sent Fri, Nov 28th 2014, 13:03
From yahoo Sent Fri, Nov 28th 2014, 13:03
> Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes...
> How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ?
> When the 9/16 switch is flipped, does the last step output automatically have 8 added to it so it addresses steps 9-16 on
> the second A155 ?
>
> Example, I want to run random seq/pendulum etc between steps 3-13 : can I do this ?
>
> Reason for asking is that my 2nd A155 is in the post today and I wanted to think about this issue before it arrives.
>
> Appreciate any advice
> Steve
Yes, this will work - provided that the A-154/A-155/A-150 are patched correctly. But for both A-155 the steps 1-8 will be addressed
in parallel. The switching between the stages 1-8 and 9-16 is carried out by the A-150 which is controlled by the 9-16/A3 output of
the A-154.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/