From Florian Anwander Sent Mon, Jun 13th 2016, 07:58
Hello Dieter On 13.06.16 09:34 , xxxxx@xxxxxxx.xx [Doepfer_a100] wrote: > The hum is probably caused by a ground loop. Due to safety reasons all metal parts of the A-100 cases are connected GND AND to earth > shield of the mains connector. Scott wrote "No the rails are not connected to ground. This is the way Doepfer built the box and I was not advised to change it." These are LC9 cases. Are those cable in a different way? Florian ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/