From Oakley Sound via analogue Sent Mon, Oct 29th 2018, 15:40
A couple things to note about the AD8200: Firstly, the sample rate is limited to 44.1kHz or 48kHz. Secondly, and more annoying to me is that there is crosstalk from the signal and peak LEDs to the audio input on adjacent channels. So if one channel's audio is blinking those LEDs then you'll hear a low frequency noise from the two channels on either side. It's relatively low level but it has been a nuisance on a few occasions. I had a quick look inside but couldn't see an obvious and easy fix so I left it for another day... Tony www.oakleysound.com