From yahoo Sent Fri, Feb 19th 2016, 16:09
> Thank you, Florian! > > >> I'm running the pitch CV through an A-185-1 first, so buffering hopefully shouldn't be an issue. > > > If I understand the comment on the http://www.doepfer.de/a171.htm (yes, > > this one! Not the 1712.htm) right, then the buffer must be AFTER the > > slewlimiter (=at the output), not before/at the input. > > You're right, thanks! I'll try them in that order. > > > Also it looks to me, that the A-172-2 is not really intended for the > > usage with a VCO. > > Do you (or does anyone else for that matter) know if the A-170 or A-171 is more designed for slewing pitch CVs in > particular than the A-172-2? That paragraph you quoted suggests that either of those two should be fine for what I'm > trying to do, but if anyone could verify this before I buy another slew module, I'd appreciate it! > > Thanks! > Zoƫ. For portamento applications (pitch CV slew limiting) I'd recommend the upper section of the A-170. It has been optimized for this job. It has e.g. no serial output resistor to avoid any voltage losses. The A-171-2 has a lot of cool features but precise slew limiting for pitch CV is not among these. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/