From sines Sent Thu, Feb 15th 2018, 22:01
From sines Sent Thu, Feb 15th 2018, 22:01
These pieces are worth something to me, but also don=E2=80=99t often = warrant $100 minimum bench fees per item, which is usually beyond the = cost of the kit or item.=20 Sadly much of the DIY is plagued with lifted pads [pre temperature = controlled iron] and will need rerouting to get stuff to talk to each = other. I=E2=80=99m looking to have someone have a look at the following: Korg VolcaKeys: power inlet needs replacement or conversion to standard = 9V Boss 2.1mm barrel, check / replace resettable fuse=20 Korg Monotribe: power inlet needs replacement or conversion to standard = 9V Boss 2.1mm barrel, check / replace resettable fuse=20 Euro:=20 ** Intellijel uVCF **=20 missing 1 diode, 2 resistors, 1 Zener Diode, all SMT. Replaced multi = turn 50k trimmer [side] with 50K single turn [top], can reverse this.=20 TipTop 909 Clap: Envelope not working at all. Acts as if it's a roaring = crowd of applause, which is cool, but not quite what I'm going for.=20 Division 6 dual sequencer : lifted pads and need to reinstall TL431 & = L4931CZ50 Regulator. Worked until L4931CZ50 got damaged somehow.=20 HexInverter NeinOhNein Snare: barely makes sound, pots appear not to = have barely any affect on sound. Synthrotek Deluxe Power: lifted pads near power inlet, +5V rail never = worked=20 Synthrotek Verb: lifted pads for control pots =E2=80=94 not operating as = advertised Ryo Ampmix: Help all over. Never made / passed sound. First DIY build, = been sitting around for a while.=20 STG / Magic Smoke Mankato Filter: chopped down from frac to Euro size. = Most components there, including V2164, except 2k tempos.=20 Seriously no idea what I=E2=80=99m doing on this.=20 STG Wavefolder: stuffed minus ICs. 4 lifted pads on diodes D1-D2, = D22-D23.=20 people local to NYC would be great if possible. Thanks! Todd=