From doug Sent Tue, Jan 29th 2019, 14:51
I'm not looking at editing samples, just patch parameters, but the Digidesign Sound Designer manual only mentions the Mac (RS-232) interface for editing the patch parameters, so I think I'm still out of luck. --- Doug Huseby http://synthark.com http://synthark.org On 2019-01-29 05:45, Sevo Stille wrote: > Am 28.01.2019 um 22:40 schrieb xxxx@xxxxxxxx.xxx: >> Good point, I was assuming the Emulator II supported MIDI SysEx, since >> the Emax does (which was based on the Emulator II), but the lack of >> SysEx support would explain why the MIDI discussion in the user manual >> does not mention it. At least the Emax manual mentions to call Emu >> for SysEx documentation. > > The original sample edit interface on the E-II was serial RS-422 > "Appletalk". To make it even more complex, the non-sample > communication (selecting patches and dumping patch parameters) went > through MIDI, while the sample dump went over the serial. I don't know > whether they added MIDI sample dump sysex on some later (Emax era) > firmware - I only looked into it around 87. > > regards Sevo