From yahoo Sent Thu, Feb 5th 2015, 08:55
From yahoo Sent Thu, Feb 5th 2015, 08:55
> BTW I see the 8 CV inputs are factory configured. Anybody know how easy it is to make them all just CV inputs, no foot
> controllers etc?
If you are familiar with electronics that's possible but a lot of work. You have to interrupt the signal that leads from each
potentiometer to the measuring input of the ADC-unit and replace it by a socket for the external CV. And you have to make sure that
the external voltage is in the range 0...+5V (i.e. a protection circuit for each input). Negative voltages and voltages beyond +5V
will destroy the electronics. If you only need the CV-to-Midi function (i.e. no potentiometers and the housing) I'd recommend the
DIY/OEM products Pocket Electronic or USB64. If you want a module I'd recommend the A-192-1.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/