From yahoo Sent Fri, Jan 9th 2015, 11:58
> Hi there > > From the technical infromation of the dark energy it says: > > > > "To connect two Dark Energy's via Midi JP5 of the first unit has to be wired to JP6 of the second unit. Asuitable link > cable is available soon. Pay attention to the correct polarity of the cables (GND?GND andhot pin?hot pin). If the > polarity is wrong nothing can be damaged but the link function will not work. Thelink cable is fed trough the holes in > the side plates of the case. If a wooden side plate is used between thetwo units the side plate has to be drilled in addition" > > > I was wondering, what this suitable cable is? It's just a cable that connects to pins? I'm guessing these are quite > generic but do they have a name? > > > thanks The cables just connect two pins are included with each Dark Energy. But an external Midi thru box with 2 outputs does the same job. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/