From bionaut Sent Fri, Feb 11th 2005, 13:22
this is a reply from dieter doepfer answering a question i had about using cv/gate output from a regelwerk to sequence a ppg wave 2.2. can anyone tell me whether the ppg requires a gate voltage higher than +5V? "Sorry - I'm not familiar with the PPG details. As far as I know the CV inputs corresponds to the 1V/octave standard (same as the Regelwerk CV outputs). But may be the PPG requires a higher gate voltage (the Regelwerk outputs only +5V gate level). Please look into the PPG manual concerning the Gate specification."