From Lorne Hammond Sent Wed, Feb 13th 2019, 15:03
The s-trigger is a short to ground I believe. Thgis is why a "dummy plug" ( Both promgs soldered together, keeps the filter open for processing audio when it has no enevelope follower). The narrow and wide prongs are likely different because of polarization? Probe your mini to confirmand then put your cord in and confirm the orientation matches that of the machine socket? If all is right the problem is at the doepfer end. Lorne -----Original Message----- From: eon <xxx@xx.xx> Sent: February-13-19 3:52 AM To: 'AH' <xxxxxxxx@xxxxxxxxx.xxx> Subject: [AH] Problems with S-trig on Doepfer MCV4 Guys, I'm having a hard time getting the Doepfer MCV4 to work with a Minimoog. I have removed the internal jumper to switch from voltage trigger to S-trig. The converter gets MIDI notes, will change Mini's pitch (when a key is held on a Mini) but will not trigger. I have check the same setup with a different (non doepfer) converter and it triggers nicely. Any ideas, anyone ever experienced issues with S-trig on MCV4? Many thanks Maciek