From Legion Sent Mon, Jan 30th 2006, 02:55
From Legion Sent Mon, Jan 30th 2006, 02:55
My guess woudl be perpahs one of the cables fomr the modules is inverted or possibly the PS cable is? Does the buss board light up at all? I would disconnect all the modules and the Buss board and reconnect the buss board alone or maybe with one module (with leds) and see if you can get anything online from that. On Sun, 29 Jan 2006, jason amm wrote: > hi, > > i recently started a small Doepfer system with a 6u case (purchased new). > i've had it for a few weeks and it has been working fine. today i installed > a couple of new modules and moved a couple of modules around. > > the case was powered down when the modules were installed, but after i > turned it back on - nothing - the case is dead (no power). i double checked > the modules i installed, and i did everything correct as far as i can tell. > i even tried disconnecting all modules & powering back up - nothing. it's > nothing stupid like the plug became loose or the power bar is turned off, > i've triple checked all of those kind of things. > > anybody have any ideas what i could have done? is it really easy to blow the > power supply like this on a Doepfer system? > > most importantly, is there a simple fuse or something that i could replace > to potentially revive this thing? > > i would really appreciate any help or suggestions! thx > > jason > > -- ___________________________________________________________________ HELP WANTED PRODUCTIONS - Http://www.HelpWantedProductions.com "Bringing you the best in Organic Electronic music since we started..." Home of the Unusual Instrument and Recording Gallery with pictures and info of Tube recorders, Omnichords, weird guitars, Casios, and more.