From Peter Grenader Sent Mon, Feb 7th 2005, 19:28
In inches, fracs are 5 1/4 inches tall and euro is 5.05 inches. So there will be some adaptation required, in which you'll have to take into account that the mounting holes for frac are a considerable distance form the edge of the faceplate and the rails may be be too close together to allow the euro pcbs to pass through them top to bottom. It may not be a concern, but...you might want to look into this. - P Cornutt, David K wrote: > A related question: how much difference is there between > the FracRack and Eurorack formats? If I wanted to mount > an Analogue Systems or Doepfer module in an MOTM-format > chassis, how much work would it be to modify a Blacet > MOTM adaptor to hold a Eurorack module? Or would it be > less trouble to just make my own adaptor? > > (And yes, I know about the power difference between MOTM > and AS/Doepfer.) >