From N. Kent Sent Mon, Jul 26th 1999, 12:35
From N. Kent Sent Mon, Jul 26th 1999, 12:35
> Nick wrote: > > >What I mean by that is if you put a Doepfer and Conussor module > >next to eachother, there is a gap of like 5mm?, even though the module > >widths are bases on the same 84 HP across standard. > > No, there are no gaps between Concussor and Doepfer modules. If you use > Integrator modules you can use different retainers, and then there are no > gaps between anything and anything. > > Regards, > > Gordon. Yes, My appologies for swapping the names. Doepfer + Concussor have one format of screw hole spacing. Integrator has another. > The TH48 was made by Analogue Systems, the manufacturer of the RS > Integrator. > It was distributed by Analogue Solutions, the manufacturer of the > Concussor. > > Actually, Nick had one bit right... the TH48 is now discontinued, and > superseded by the various sequencers and quantisers in the RS Integrator. I seem to have gotten 0 for 2 here. For the most part though the Integrator RS-200 module is the heart of the sequencer (8x3 + 8 switches), but yes the quatitizer module (RS-260) is separate, as is a Programmable Scale Generator (RS-130). nick