From yahoo Sent Tue, May 2nd 2017, 08:28
I ask you to contact Christian Assall (xxxxxxxx@xxxxxxx.xx) directly if you find a bug in the Dark Time firmware. Thank you Dieter Doepfe > can't confirm these, but i have noticed an autosave bug in my > Dark Time re: midi channel. > > > i was using it in 1-16 (single row) mode on channel 2 for a > bassline, and once in a very rare while after first turning it on > the second half of the bassline would diappear, and upon > investigating i found that row 2 had reverted back to default > channel 1 (row 1 remained on ch 2 like it should). it only > happened at initial startup (and it was only an extra 5 seconds > to reset it when it did), but it is a "consistently random" bug i > noticed. (not sure what firmware mine is; have to crack it open to look) > > > just my two farthings contribution! > > > -chris :-) > > > > > > > > From: "xxxxxxxxxxxxxxxxx@xxxxx.xxx [Doepfer_a100]" > <xxxxxxx_xxxx@xxxxxxxxxxx.xxx> > To: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Sent: Friday, April 28, 2017 9:31 PM > Subject: [Doepfer_a100] Dark Time issue. > > > > > I contacted the software division of Doepfer this morning but > maybe someone can confirm this. > > > Although I'm a long time Dark Time owner I noticed some strange behaviour. > > When in 1-8 Combi Mode and the lower part is set to Velocity > there's no gate output at 'Gate 2 Out'. > In Auto Save mode the Clock Divider is not saved correctly. When > set to e.g. '1/4T' it is saved as '1/16.' so one clock setting slower. > Currently I'm using Firmware version > 'darktime_V1.20_fw_c_131107'. As far as I know this is the latest version? > > > Best regards, > Karel. > > > > > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/