From Kenny Balys Sent Wed, Jun 13th 2018, 04:05
That design is sexy! :) On 13.06.18 03:01 , Brian Willoughby wrote: > If those 9.8mm wide digits are too large for your modular, you can > try the Broadcom HDLx-2416 series, which has digits that are 6.35mm > wide. They’re a bit taller, though. And much more expensive. But the > interfacing is simpler because the drivers are built in to the larger > package. > > Here they are on my latest prototype (scroll down): > > https://madronalabs.com/topics/4195-call-for-input-soundplane-to-cv-module?page=5 > > Brian > > > On Jun 12, 2018, at 2:14 PM, James Grenert <xxxxxxx@xxxxx.xxx> > wrote: >> I built a pretty cool clock using a similar type of display: >> https://www.youtube.com/watch?time_continue=6&v=qF9Mvzi-YKM (not my >> video, but got the kit from this guy) >> >> On 6/12/18, Mike HEQX <xxxx@xxxx.xxx> wrote: >>> https://www.youtube.com/watch?v=ufc7_J3UmEY >>> >>> Working example >>> >>> On 6/12/2018 12:15 PM, Kenny Balys wrote: >>>> >>>> Bring back the gorgeous! >>>> >>>> Please, everyone start designing these into your next builds: >>>> >>>> https://www.digikey.com/catalog/en/partgroup/ltp-305-series/31999 >>>> >>>> >>>> Here is a daughter board for Raspi Pi's for illustration: >>>> >>>> https://shop.pimoroni.com/products/microdot-phat >>>> >>>> Beautiful! >>> >> >