AW: [Doepfer_a100] A-180-3: Current

From yahoo
Sent Thu, Dec 10th 2015, 09:14

> Dear all,
>
> what is the Current of the A-180-3? There is obviously no concrete specification on Doepfer’s Homepage L
>
> I guess it could be something around 30 mA (+12 V), correct?
>
> Best from cologne/Germany
> Wolfram

The current consumption of the A-180-3 is +20mA / -20mA.

Note: In the future we will specify the currents for +12V and -12V separately for each module. The reason is, that each A-100 module
takes the same or less current at -12V compared to +12V (about 40% less on average). The new power supply A-100PSU3 outputs 2A@+12V
and x.xx@-xxx and one has to pay attention that the sums of the currents at +12V and -12V does not exceed these values. But normally
that's true for A-100 modules even if only the currents at +12V are summed up. In addition the A-100PSU3 has +5V with 4A available.
These are not required for A-100 modules but for some modules from other manufacturers.

Best wishes
Dieter Doepfer



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
    (Yahoo! ID required)

<*> To change settings via email:
    xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx 
    xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> To unsubscribe from this group, send an email to:
    xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/